> CCTV System
> Access Control
Intruder Alarm
Wired Alarm System
Wireless Alarm System
Control Panels
Wired Alarm Sensors
Wireless Alarm Sensors
Zone Expanders 
Speech Dialers
GSM Data Dialer
Alarm Monitoring
> Guard Tour
> Public Address
> Door Entry
           In Honeywell wireless alarm system keypad, siren and wireless receiver are hard wired to the control panel.  The wireless receiver is usually located at the central location.The wireless receiver communicates without wires with various wireless sensors like motion detector, glass break detector and door / window sensor. The speech dialer is also hardwired to the alarm control panel.

            The control panel can also be programmed to send messages to Dubai Police alarm monitoring station. A normal telephone line is connectec to the alarm control panel if it has to to be connected to alarm monitoring station. The telephone line is connected to the speech dialer if no police connection is required but the user would like to receive voice messages on his or her phone.

        Keypad is used for arming, disarming and programming. Also one can use remote buttons for arming, disarming the system and also panic button can also be programmed  on the remote buttons.

        The wireless sensors should be installed in a range of 100 meters. The right control panel should be selected to support the number of wireless receivers.    If the distance is more then one can use multiple receivers.  The locations should be properly selected.
          Wireless Alarm System is mainly used in Villas where the interior design should not be disturbed by visible wires or conduits. By installing wireless alarm system the interior beauty is kept intact.

            Wireless alarm system can be used where it will be dificult to do cabling in any kind of properties like offices, warehouses and factories. Dubai police does not allow wireless alarm system for commercial properties if it has to be connected to Dubai Policed Alarm Monitoring Central Station. But for residential properties wireless alarm system can be used and also it can be connected to Dubai Police alarm monitoring central station.

            The control panel is connected to 12V DC 7AH battery for backup in case of power failure. The sensors work on batteries. Normally the  sensor batteries last for about an  year and reommended to be changed every year. Or once the battery is discharged it will indicated on the keypad which battery to be changed and needs to be changed or else the panel will not allow to arm the system if that sensor or zone is not bypassed.

            The keypad will be indicate 'fault' message if any of the zones are opened like door or window or there is motion in front of the motion detector. If it shows 'Check' message then the battery has to be changed or the sensor is gone defective. For fault mesages no need to call the installation company. If it shows check messages then you need to call the installation company.
Honeywell Wireless Alarm System